Showing posts with label WRT54GL. Show all posts
Showing posts with label WRT54GL. Show all posts

Saturday, July 16, 2011

General Notes about WRT54GL with DD-WRT

Recommended Build?
==================
Beta 13064 dated Oct 2009 - poor wireless performance
So go to 14929
Download at ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2010/08-12-10-r14929/broadcom/
Ref: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=52043


Upgrading to a Newer Version of DD-WRT
======================================
If DD-WRT is already installed on your router,
you can simply upgrade to a new version via the web interface or TFTP.
However, it is highly recommended that you restore the router to defaults using the reset button before and after flash.
Ref: http://www.dd-wrt.com/wiki/index.php/Installation


Cautions
=========
DO NOT USE THE "ROUTER DATABASE" AS A SUBSTITUTE FOR READING THE WIKI!
Ref: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486


webgui
======
Your default username/password is always root/admin.

If you can't get into your webgui, try telnet or ssh, where the username is always root.

You have to hit "apply" for your changes to be made permanent.
"Save" just stores them temporarily in memory without actually writing them.


Options
=========
Assign WAN Port to Switch : Optionally enable this to use the WAN port as another LAN port

Static DHCP address assignments = (จ่าย ip เดิมให้กับ client)

Additional DDNS support (รองรับ dyndns ทำให้เข้าถึง router ได้ถึงแม้ว่า ip address จะเปลี่ยน)

Client isolation mode (กันไม่ให้ลูกข่ายที่ใช้งาน wireless ต่อถึงกันได้ จะติดต่อได้กับ access point เท่านั้น)

Do not raise your TX value
should fix signal issues with better antennas not power.
Many routers do much better with LOWER TX values,
around 40-50 especially those with the crappy internal antennas (linksys ashtrays).
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486

ยิ่งปรับ tx power เยอะ, speed รับส่ง ยิ่งต่ำ
http://www.overclockzone.com/forums/showthread.php?t=796019


Ref: http://www.overclockzone.com/forums/showthread.php/548956-WRT54GL-V-1.1-ของใหม่ยังไม่แกะชีลล์-2-050-ครับ

Advanced Wireless Settings Reference Guide
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51039



Telnet
=======
When asked for the username, enter root (even if you changed username in web interface)
When asked for the password, enter your router's password (default "admin")
Ref: http://www.dd-wrt.com/wiki/index.php/SSH



รายละเอียดของ embeded linux เช่น nvram, Common Firmware Environment (cfe)
http://www.electoday.com/home/space.php?uid=59&do=blog&id=121

Forward Port
คืออะไร และ ตัวอย่างการใช้งาน http://www.electoday.com/home/space.php?uid=59&do=blog&id=146

Tuesday, May 10, 2011

WRT54GL

specification
==============
http://www.dd-wrt.com/wiki/index.php/Linksys_WRT54GL


Term
====
The CFE file, which is the program that boots the router and is specific to your router,
the NVram which is the memory for settings
the kernel which is the firmware.
Installing programs on a router, known as firmware, are achieved by a method called flashing.
Brick = a device that cannot function in any capacity (such as a device with damaged firmware).
more at http://en.wikipedia.org/wiki/Brick_(electronics)


This is SUPER easy and REALLY important.
=========================================
http://www.dd-wrt.com/wiki/index.php/CFE_backup
or
http://192.168.1.101/backup/cfe.bin

Some people share efc online
but your MAC address is stored in the CFE file
Ref: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486


ประสิทธิภาพ
===========
ระยะทางประมาณ 4-5 กม.
http://ton.packetlove.com/blog/life-style/wrt54gl-point-to-point.html


การปรับค่าเพื่อประสิทธิภาพ
============================
Do not raise your TX value
should fix signal issues with better antennas not power.
Many routers do much better with LOWER TX values,
around 40-50 especially those with the crappy internal antennas (linksys ashtrays).
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486

ยิ่งปรับ tx power เยอะ, speed รับส่ง ยิ่งต่ำ
http://www.overclockzone.com/forums/showthread.php?t=796019


more about external antenna
===========================
(yagi, panel antenna, biquad dish antenna, gain, milliwats, dbi, dbd, etc.)
see http://www.dd-wrt.com/phpBB2/viewtopic.php?t=43810,


Others
======
network analysis Software
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=57417

Wi-Fi tools that help troubleshoot WLAN networks.
http://www.metageek.net/products/inssider/

http://www.wifimove.com/OurFiles/Articles/Linksys_WRT54G_Ultimate_Hacking/Linksys_WRT54G_Ultimate_Hacking.pdf


Firmware
========
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=52043
http://tarifa.sourceforge.net/
http://www.polarcloud.com/tomato

Compile kernel เอง
http://www.electoday.com/home/space.php?uid=59&do=blog&id=112

Saturday, February 5, 2011

ขยายสัญญาณ wireless จาก nlink ด้วย WRT54GL

1) Update fireware WRT54GL
===========================
ผมทำตามขั้นตอนจาก http://spalinux.com/2009/04/install_dd-wrt_firmware_on_linksys_wrt54gl

โดย fireware ของ dd-wrt v24 preSP2 (Build13064)
ซึ่งไฟล์ที่ใช้ upgrade คือ dd-wrt.v24_mini_generic.bin
และ dd-wrt.v24_std_generic.bin

ปล. ตอน upgrade เป็น mini เมื่อเข้าหน้า admin console มันแจ้งบน title bar ว่า error
ไม่ได้สนใจมัน upgrade ต่อด้วย std แล้ว error ก็หายไป

2) nlink
=========
ผมกำหนดดังรูป




3) WRT54GL
==========




# Under Wireless -> Basic Settings:
* Wireless mode: Repeater
* Wireless Network mode: (set to match the host)
* Wireless Network Name (SSID): the SSID of the network you connect to
* Network Configuration: Bridged
* Save
* Add 1 virtual interface
* Enter a new (unique) SSID of your choice
* Wireless SSID Broadcast: Enable
* AP Isolation: Disable
* Network Configuration: Bridged
* Save
(หลังจาก apply change และ reboot router
Wireless mode มันเปลี่ยนเป็น Repeater Bridge เอง)

# Under Security:
* Uncheck all items in the "Block WAN Request" section (except Filter Multicast)....THEN disable the SPI firewall


4) Go Online
============
เมื่อใช้งานเครือข่าย, ก็เชื่อมต่อไปยัง SSID ของ virtual interface ได้เลย

Note
====
- ผมกำหนดความปลอดภัยด้วย mac address filter เพียงอย่างเดียว
ไม่ได้ใช้ WEP หรือ WPA เป็นต้น
(ซึ่งไม่ได้ลงรายละเอียดไว้)

- เมื่อต้องการเข้า control panel
ของ nlink ก็ http://192.168.1.1/
ถ้าของ WRT54GL ก็ http://192.168.1.101/


เรียบเรียงโดย สิริพงษ์ พงศ์ภิญโญภาพ